Follow by Email

Followers

Loading...

02 March, 2013

How to Reset Canon IP2770 printer Error code 5B00 with service tool



How to Reset Canon IP2770 printer Error code 5B00

100% successful service tool.

Download Canon iP2770 Resetter v1074:



Go to the canon iP2770 printer Service Mode :

The printer is off and plugged the power cord.
Press the RESUME button two seconds
then press the POWER button until the green light flame (while pressing the POWER button, ... don't release RESUME button)
Then release the Resume button, but do not release the POWER button.
POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
Release both buttons simultaneously.
Led will blink briefly and then will glow GREEN.
The computer will detect new devices found, please ignore .....
This situation is called SERVICE MODE iP2770 and iP2770 ready to be reset.

Then run Canon iP2770 Resetter v1074 :
Extract the File iP2770 Resetter.
Prepare a two paper in the printer (to print at the time of the reset process).
Run the program iP2770 Resetter
Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"
Click the "EEPROM Clear".
Then click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows:
"TPage (TTL = 00 000)"
Turn off the printer by pressing the POWER button.
Thats Done ...

3 comments:

  1. I have do the instructtion, but my computer cant detect the device properly, so the resetter cant respond. what should I do?

    ReplyDelete
  2. same problem in cant detect the canon device... then when i click MAIN service tool not responding it print but the paper stuck in my printer...

    ReplyDelete
  3. disconnect the usb from your printer, re-install the canon ip2770 driver, connect the usb when prompted... open the ip2770 service tool....if your CANON ip2770 service tool hangs or you get the error 005 0r error 006...try downloading Canon M287 service tool resetter instead.

    ReplyDelete